ewan the shushing sheep support : battery
Battery Advice for ewan the shushing sheep
We highly recommend using rechargeable Lithium Ion batteries but if this is not possible we would recommend high quality Alkaline batteries for use in our products. Do not mixed brands of batteries and always use brand new or recently charged batteries when replacing them inside the product.
If you get 2 sets and rotate them, then you will always have fresh batteries to hand! This will work out much more economical, plus you’ll be helping conserve energy and the planet too! If the cry sensor in your ewan suddenly stops working or keeps switching itself off, then you need to change his batteries.
You will need:
- A Cross-head Screwdriver
- 3 x AA Batteries (LR06 1.2-1.5V max)
Firstly, remove the control pod from the Velcro pocket in ewan’s tummy. Insert 3 x AA 1.5V batteries (NOT INCLUDED) into the battery compartment located on the back of the control pod. Unscrew the lid screw with a cross-head screwdriver, insert the batteries observing the correct polarity ( + / - ) as illustrated or indicated on the inside of the battery compartment, then replace the lid and screw to secure in place. Do not over-tighten screw. Reinsert the control pod securely into ewan's Velcro tummy pocket, ensuring you seal the Velcro.
TOP TIP: We highly recommend using re-chargeable batteries with ewan the shushing sheep. Asides from being more economical, they are more eco-friendly.